유니오텍

(주)유니오텍의 측정기 제품입니다.

측정기 | Detector & Analyzer > Laser Beam Profiler

Product	TaperCamD-LCM – Large Area CMOS Beam Profiler 25 x 25 mm CMOS Beam Profiler System, 355 to 1150 nm -. 355 to 1150 nm, standard CMOS detector -. 4.2Mpixel, 2048 x 2048 pixels, 25 x 25 mm active area -. 12.5 µm pixels (effective) -. HyperCal™ – Dynamic noise and baseline correction software -. Port-powered USB 3.0; flexible screw locking 3 m cable; no power brick -. 12-bit ADC, on-board microprocessor -. Window-free sensors standard for no fringing -. 25,000:1 electronic auto-shutter, 79 µs to 2 s -. 2,500:1 SNR -. Global shutter, optical/TTL trigger -. Isolated pulse triggering and parallel capture	크게보기
Application	CW and pulsed laser profiling Field servicing of lasers and laser-based systems Optical assembly & instrument alignment Beam wander & logging	크게보기
Download	TLCMREV2.1.pdf

관심제품등록

Product Info

Specification	Detail
Wavelength	355 to 1150 nm
Pixel Count‚ H x V	4.2 MPixel‚ 2048 x 2048
Image Area	25 x 25 mm
Pixel Dimension	12.5 x 12.5 µm effective
Min. Beam (10 pixels)	~125 µm
Shutter Type	Global
Max Frame Rate*	60 Hz
Single Pulse Capture PRR	USB 2.0: 6.3 kHz USB 3.0: 12.6 kHz
Signal to RMS Noise	2,500:1 (34 dB optical / 68 dB electrical)
Electronic Shutter Range	USB 2.0: 12,600:1 (41 dB) USB 3.0: 25,000:1 (44 dB)
ADC	12-bit
Measurable Sources	CW beams‚ pulsed sources; CW to 12.6 kHz with single pulse isolation Software configurable Auto-trigger‚ Synchronous & Variable Delay
Measured Beam Powers	See Charts
Manual Beam Attenuation	Included 2" NDXL-1‚ NDXL-2‚ NDXL-4 Neutral Density filters. Other OD values available.
Displayed Profiles	Line‚ 2D & 3D plots. Normalized or un-normalized. Linear or Logarithmic‚ Zoom x10 2D‚ 3D in 10‚ 32 or max. colors or grayscale Contoured display at 10 and 32 colors
Measured & Displayed Profile Parameters	Raw and smoothed profiles Triangular running average filter up to 10% FWHM
Beam Diameter	Diameter at two user set Clip levels Gaussian & ISO 11146 Second Moment beam diameters Equivalent diameter above a user defined Clip level Equivalent Slit and Knife Edge diameters
Beam Fits	Gaussian & Top Hat profile fit & % fit Equivalent Slit profile
Beam Ellipticity	Major‚ Minor & Mean diameters. Auto-orientation of axes.
Centroid Position	Relative and absolute Intensity Weighted Centroid and Geometric Center Beam Wander Display and Statistics
Measurement Accuracy (not limited to pixel size)	0.1 µm processing resolution for interpolated diameters. Absolute accuracy is beam profile dependent - ~1 µm accuracy is frequently achievable. Centroid accuracy is also beam dependent (as good as ±1 µ since it is arithmetically determined from all pixels above the centroid clip level).
Processing Options	Image & profile Averaging‚ 1‚ 5‚ 10‚ 20‚ Continuous. Background Capture and Subtraction. User set rectangular Capture Block for capture User set or Auto ellipse Inclusion region with beam tracking for processing *.ojf files save all WinCamD custom settings for particular test configurations
Pass/Fail display	On-screen selectable Pass/Fail colors. Ideal for QA & Production.
Log Data and Statistics	Min.‚ Max.‚ Mean‚ Standard Deviation‚ to 4096 samples
Relative Power Measurement	Rolling histogram based on user's initial input. Units of mW‚ µJ‚ dBm‚ % or user choice (relative to a reference measurement input)
Fluence	Fluence‚ within user defined area
Certification	RoHS‚ WEEE‚ CE
Multiple Cameras	Up to 4 cameras, parallel capture. 1 to 8 cameras, serial capture.
Head Dimensions‚ Width x Height x Depth	2.25 x 2.25 x 2.13” (57 x 57 x 54 mm)
Optical depth from housing/filter to sensor (no window) ±0.2 mm	TBA mm (TBA mm with NDXL filter)
Mounting	1/4-20 thread
Weight‚ Camera w/ NDXL and filter cover	TBA oz (TBA g)

Product

측정기

Product Info

Partner Company